FOXBORO E69F-BI2
The FOXBORO E69F-BI2 is a field-installed current-pneumatic signal converter that takes a standard DC input signal and converts it into a proportional pneumatic output signal. This conversion allows the module to be used easily with other pneumatic instruments o
r control valves. The “CE” marking on the product indicates that the product complies with the requirements of the applicable EU directive. In addition, the E69F-BI2 is compact, easy to install and can be easily connected to electrical and pneumatic interfaces for a variety of installation environments, such as nominal DN 50 or 2 upper 12 in surfaces, valve yoke or vertical piping.
Product parameters and specifications:
Specific parameters and specifications for the FOXBORO E69F-BI2 may include, but are not limited to, the following:
Operating voltage: The module may have a specific rated operating voltage, such as 220V3.
Output frequency: For example, some models may have an output frequency of 80kHz 3.
Environmental adaptability: Its design takes into account the minimal impact of the ambient atmospheric environment, such as the galvanometer motor design can provide sufficient clearance between the coil and the housing to reduce the impact of normal atmospheric changes in corrosion and dust particles on the operation of the mechanism 2.
Versatility: The module may have the ability to select input and output signals, as well as the ability to separate input ranges and direct or reverse actions, making it suitable for a variety of applications2.