ABB FENA-21
ABB FENA-21 module is an Ethernet communication interface provided by ABB for its drive products such as frequency converters. It allows ABB drives to connect to various industrial networks such as PROFINET, EtherNet/IP, and Modbus TCP for communication and data exchange with other devices.
Main function
Multi-protocol support: FENA-21 supports a variety of industrial protocols such as PROFINET IO, EtherNet/IP and Modbus TCP, and has strong compatibility.
Network connection: The ABB driver is connected to the industrial network through the Ethernet interface to achieve communication with PLC, HMI and other devices.
Parameter configuration: You can use software tools to configure module parameters, such as the IP address, subnet mask, and gateway.
Data transmission: Support the transmission of driver parameter setting, condition monitoring, fault diagnosis and other data.
Product parameters and specifications (typical values, refer to the product data manual)
Interface type: Ethernet interface
Protocol support: PROFINET IO, EtherNet/IP, Modbus TCP
Data rate: 100Mbps
Installation mode: Installed on an ABB drive